Jablotron Sales – internal B2B shop
Label printer PT-P700-X
PT-P700-X

Label printer PT-P700-X

Dimensions : 78 x 152 x 143 mm
Disponibilità e prezzo sono visibili dopo l’accesso.
ACC-D-UX5R UX 5 R Universal plastic wall plugs for screws.
ACC-D-UX5R

ACC-D-UX5R UX 5 R Universal plastic wall plugs for screws.

Suitable for wall mounting of most alarm devices.
Disponibilità e prezzo sono visibili dopo l’accesso.
ACC-D-UX6R UX 6 R Universal plastic wall plugs for screws.
ACC-D-UX6R

ACC-D-UX6R UX 6 R Universal plastic wall plugs for screws.

quantity 100 pcs Corresponding hole diameter 6 mm
Disponibilità e prezzo sono visibili dopo l’accesso.
Addressable terminal module JA-110Z
JA-110Z

Addressable terminal module JA-110Z

The JA-110Z is an addressable bus terminal module for the JABLOTRON 100+ system. It provides 2 × 4 parallel terminals for branch interconnection, includes two tamper contacts and is supplied in the JA-190PL mounting box. Occupies one system address.
Disponibilità e prezzo sono visibili dopo l’accesso.
Battery holder BH-80A
BH-80A

Battery holder BH-80A

Plastic holder for five C batteries (LR14, 1.5 V) for Jablotron JA-80A and JA-180A outdoor sirens. Enables replacement of the original BAT-80A‑SAFT lithium pack with alkaline cells (total 7.5 V); service life typically drops to about 2 years.
Disponibilità e prezzo sono visibili dopo l’accesso.
Bus back-up booster unit JA-120Z
JA-120Z

Bus back-up booster unit JA-120Z

JA-120Z is a BUS booster for JABLOTRON 100: boosts bus power, extends loop length and provides galvanic isolation. Output DC 13.5 V/2 A; two independent outputs, each up to 500 m. Supports 12 V backup battery (7–18 Ah).
Disponibilità e prezzo sono visibili dopo l’accesso.
BUS terminal module JA-110Z-A
JA-110Z-A

BUS terminal module JA-110Z-A

The JA-110Z-A is an addressable BUS splitter for the JABLOTRON 100+ system, used to branch and join BUS lines. It includes tamper contacts, auxiliary terminals for wired zones and is supplied for mounting in a JA-190PL enclosure; occupies one system position.
Sostituito
Sostituito da: JA-110Z-B
Bus terminal module JA-110Z-B
JA-110Z-B

Bus terminal module JA-110Z-B

BUS terminal module for joining JA-100 bus lines; fits into JA-190PL enclosure.
Disponibilità e prezzo sono visibili dopo l’accesso.
Bus terminal module JA-110Z-C
JA-110Z-C

Bus terminal module JA-110Z-C

Bus terminal module for the JABLOTRON 100 BUS. Designed to connect JA‑100 bus lines; fits into the JA‑190PL mounting box. Maximum voltage 42 V AC / 60 V DC, maximum current 2 A. Simplifies wiring, branching and later servicing.
Disponibilità e prezzo sono visibili dopo l’accesso.
CAB Cat. 5E FTP-PCV SOL -305 met kutija
CAT5E-FTP-PVC-305

CAB Cat. 5E FTP-PCV SOL -305 met kutija

Solarix Cat.5E FTP installation cable, 305 m box. F/UTP with overall foil, 4 pairs, conductors Ø 0.50 mm (AWG24), PVC jacket (grey RAL 7035), CPR class Eca. Supports PoE and Ethernet up to 2.5/5G depending on installation.
Disponibilità e prezzo sono visibili dopo l’accesso.
CAB Cat. 5E UTP-LS0H SOL- 305 met kutija
CAT5E-UTP-LS0H-305

CAB Cat. 5E UTP-LS0H SOL- 305 met kutija

Solarix Cat.5E UTP LSOH installation cable, 305 m box. Tested to 350 MHz, LSOH (Dca‑s1,d2,a1), supports 10/100/1000/2.5/5GBASE‑T and standard PoE; meter‑marked, installer‑friendly box.
Disponibilità e prezzo sono visibili dopo l’accesso.
CAB Cat. 5E UTP-PE SOL- 305 met kutija
CAT5E-UTP-PE-305

CAB Cat. 5E UTP-PE SOL- 305 met kutija

Solarix Cat.5E UTP-PE, 305 m box. Outdoor installation cable with solid 24 AWG conductors, UV‑resistant PE jacket, IP67; supports 1G and PoE—suitable for CCTV, intercoms and external network runs.
Disponibilità e prezzo sono visibili dopo l’accesso.
CAB Cat. 5E UTP-PVC SOL -305 met kutija
CAT5E-UTP-PVC-305

CAB Cat. 5E UTP-PVC SOL -305 met kutija

Solarix Cat.5E UTP PVC SOL — solid installation cable, 305 m box. 24 AWG copper (Ø 0.50 mm), PVC sheath (Eca), cable Ø 5.0 mm. Supports PoE and standard Ethernet protocols (1 G; 2.5/5G dependent on installation).
Disponibilità e prezzo sono visibili dopo l’accesso.
CAB Cat. 6 FTP-LS0H SOL- 500 met bubanj
CAT6-FTP-LS0H-500

CAB Cat. 6 FTP-LS0H SOL- 500 met bubanj

Professional Cat.6 FTP-LS0H cable (Solarix SXKD-6-FTP-LSOH) — F/UTP design, LSOH jacket (Dca‑s2,d2,a1). 500 m spool, length‑marked; supports 2.5GBASE‑T and 5GBASE‑T. Suitable for CCTV, intercoms, automation and data networks.
Disponibilità e prezzo sono visibili dopo l’accesso.
CAB Cat. 6 FTP-PE SOL- 500 met bubanj
CAT6-FTP-PE-500

CAB Cat. 6 FTP-PE SOL- 500 met bubanj

Solarix Cat.6 FTP cable (F/UTP) on 500 m reel with PE sheath (UV resistant) and IP67 protection. Designed for outdoor/industrial use; supports 10/100/1000/2.5G/5G Ethernet and PoE (802.3af/at). Length marking simplifies installation.
Disponibilità e prezzo sono visibili dopo l’accesso.
CAB Cat. 6 FTP-PVC SOL- 500 met bubanj
CAT6-FTP-PVC-500

CAB Cat. 6 FTP-PVC SOL- 500 met bubanj

Solarix Cat6 FTP cable on 500 m reel, PVC (Eca). Shielded F/UTP, 4 pairs, conductors ø 0.565 mm (AWG23). Supports 2.5G/5GBASE‑T and PoE (802.3af/at). Length‑marked for easier laying in CCTV, intercom and data installations.
Disponibilità e prezzo sono visibili dopo l’accesso.
CAB Cat. 6 UTP-LS0H SOL- 305 met kutija
CAT6-UTP-LS0H-305

CAB Cat. 6 UTP-LS0H SOL- 305 met kutija

Cat.6 UTP cable, LS0H jacket — 305 m in box; tested to 450 MHz.
Disponibilità e prezzo sono visibili dopo l’accesso.
CAB Cat. 6 UTP-PVC SOL- 305 met kutija
CAT6-UTP-PVC-305

CAB Cat. 6 UTP-PVC SOL- 305 met kutija

Solarix SXKD-6-UTP-PVC — CAT6 U/UTP installation cable, 305 m box. PVC sheath class Eca, meter-marked for easier laying; supports 2.5GBASE-T and 5GBASE-T. Suitable for CCTV, intercom and LAN installations.
Disponibilità e prezzo sono visibili dopo l’accesso.
Cable - Jablotron ColorCode CC-03 / 250 m
CC-03

Cable - Jablotron ColorCode CC-03 / 250 m

Jablotron CC-03 ColorCode BUS installation cable, EasyReel 250 m. Configuration: 1 × 2 × 20 AWG (0,5 mm2) and 3 × 2 × 24 AWG (0,2 mm2). Wire colours match JABLOTRON terminals; cable marked every 1 m.
Disponibilità e prezzo sono visibili dopo l’accesso.
Cable- Jablotron ColorCode CC-01 - 300 m
CC-01

Cable- Jablotron ColorCode CC-01 - 300 m

Jablotron CC-01 ColorCode BUS installation cable, 300 m. Available as 1 × 2 × 24 AWG (0.2 mm²) or 1 × 2 × 20 AWG (0.5 mm²); each metre is marked and the four conductors are colour-coded to system terminals.
Disponibilità e prezzo sono visibili dopo l’accesso.
Cable- Jablotron ColorCode CC-02 / 300 m
CC-02

Cable- Jablotron ColorCode CC-02 / 300 m

Jablotron CC-02 ColorCode BUS installation cable, 2 × 2 × 24 AWG (0.2 mm2). Supplied in 300 m box, black marking every metre; conductor colours match Jablotron BUS terminals.
Disponibilità e prezzo sono visibili dopo l’accesso.
GD-04P Link Cable
GD-04P

GD-04P Link Cable

The GD-04P link cable connects a PC via USB for local programming and configuration of Jablotron devices (CU-08, CA-210x, GD-04). Use with the free C‑Link (CU/CA) or GD‑Link (GD‑04) software. USB driver and Windows are required.
Disponibilità e prezzo sono visibili dopo l’accesso.
Installation box JA-190PL
JA-190PL

Installation box JA-190PL

JA-190PL multipurpose ABS mounting box for JA-100 modules. Compact 90 × 90 × 34 mm enclosure with cable entries and internal mounting positions. IP40 housing and electrical isolation up to 400 V — suitable for tidy wiring and module fixation.
Disponibilità e prezzo sono visibili dopo l’accesso.
Installation box JA-194PL
JA-194PL

Installation box JA-194PL

JA-194PL is a medium multipurpose installation box for Jablotron modules with front and rear tamper switches. Suitable for input/output modules, signal repeaters and hubs. Mountable on wall or directly onto a KU-68 back box. Size: 182×132×45 mm.
Disponibilità e prezzo sono visibili dopo l’accesso.
Installation box JA-195PL
JA-195PL

Installation box JA-195PL

JA-195PL is a multipurpose installation box for Jablotron modules, fitted with front and rear tamper switches. Dimensions 102 × 102 × 34 mm; suitable for input/output modules and hubs.
Disponibilità e prezzo sono visibili dopo l’accesso.
Installation holder-medium JA-193PL-BOX-M
JA-193PL-BOX-M

Installation holder-medium JA-193PL-BOX-M

Installation box JA-193PL-BOX-M for PIR detectors of the JA-1x1P series (e.g. JA-151P). Enables partially flush mounting into plasterboard or brick walls so the detector does not protrude. Mounting holes for M frame: 70 × 136 mm. Available in white and grey.
Non più disponibile
Installation holder-small JA-193PL-BOX-S
JA-193PL-BOX-S

Installation holder-small JA-193PL-BOX-S

The JA-193PL-BOX-S is a recessed wall mounting box for JA-1x1P PIR motion detectors (e.g. JA-111P). It enables a partly flush installation in plasterboard or brick walls for a neat, low-profile appearance. Compatible decorative frames are available in white and grey.
Non più disponibile
JA-111R housing PLV-JA-111R
PLV-JA111R

JA-111R housing PLV-JA-111R

Plastic housing PLV-JA111R for surface mounting the JA-111R radio module outside the control panel. Intended for professional installation by a certified installer.
Disponibilità e prezzo sono visibili dopo l’accesso.
JA-82T USB PC Interface Cable
JA-82T

JA-82T USB PC Interface Cable

The JA-82T is a USB interface cable for connecting a PC to an OASiS control panel using the HID standard, so no drivers are required. It provides optical isolation to protect the panel from PC-borne interference and supports direct text transfer from OLink to JA-81F wireless keypads.
Non più disponibile
JA
BL-MCB

JAB Bootloader programmer BL-MCB

JAB Bootloader programmer BL-MCB is a USB programmer for checking and updating firmware of the MCB‑02 CAN‑BUS module. Works with the MCBLink/Bootloader software to read current CAN package versions and install updates. Powered from USB; supported OS: Windows 7, Windows 10.
Disponibilità e prezzo sono visibili dopo l’accesso.
JA
ACC-SH3.5X40

JAB Drveni vijci s poluokruglom glavom ACC-SH3.5X40

JAB Drveni vijci s poluokruglom glavom ACC-SH3.5X40
Disponibilità e prezzo sono visibili dopo l’accesso.
JAB Pisač naljepnica bez ribona
PT-P710BT

JAB Pisač naljepnica bez ribona

JAB PT-P710BT is a desktop label printer (no ribbon) for laminated Brother TZe tapes used for device and cable marking. Connects via USB and Bluetooth and supports tapes up to 24 mm. Tapes and power accessories are sold separately.
Disponibilità e prezzo sono visibili dopo l’accesso.
Kabel - Jablotron ColorCode CC-11 / 200 m
CC-11

Kabel - Jablotron ColorCode CC-11 / 200 m

JABLOTRON CC-11 bus cable for JABLOTRON 100+. 1×2×20 AWG (0.5 mm²) + 1×2×24 AWG (0.2 mm²), flammability class B2CA‑s1,d0,a1, packed in 200 m box with 1 m length marks.
Disponibilità e prezzo sono visibili dopo l’accesso.
Laminated tape PT-TAPE02-BW
PT-TAPE02-BW

Laminated tape PT-TAPE02-BW

Laminated tape for PT-2430PC and PT-P700 printer
Disponibilità e prezzo sono visibili dopo l’accesso.
Laminated tape PT-TAPE18-BW
PT-TAPE18-BW

Laminated tape PT-TAPE18-BW

Laminated tape for Brother printer
Disponibilità e prezzo sono visibili dopo l’accesso.
Mounting box for PIR detectors JA-196PL-S
JA-196PL-S

Mounting box for PIR detectors JA-196PL-S

The JA-196PL-S is a small wall mounting box for PIR detectors of the JA-1x2P series. Available in white and grey, it enables partly flush mounting into plasterboard or masonry walls for a neat, discreet finish.
Disponibilità e prezzo sono visibili dopo l’accesso.
Multiposition bus terminal module JA-110Z-D
JA-110Z-D

Multiposition bus terminal module JA-110Z-D

The JA-110Z-D is a multiposition bus terminal module for the JABLOTRON 100+ system. It organises and connects up to 8 bus branches and can be split into two independent branches by removing jumpers.
Disponibilità e prezzo sono visibili dopo l’accesso.
Outdoor installation box JA-192PL-A
JA-192PL-A

Outdoor installation box JA-192PL-A

Compact IP65 plastic enclosure JA-192PL-A for outdoor installation of JABLOTRON 100+ modules. Inner dimensions 62×38×20 mm, outer 70×62×35 mm. White finish; protects electronics from dust and moisture.
Disponibilità e prezzo sono visibili dopo l’accesso.
Power supply BP 12-18
BP12-18

Power supply BP 12-18

The Jablotron BP12-18 is a universal backup power supply for devices requiring 12 V DC. It provides a regulated 13.5 V DC output, continuous 2 A (peak 3 A), and supports 12 V batteries from 7 to 26 Ah. Recommended mounting in PLV-CP-L enclosure.
Disponibilità e prezzo sono visibili dopo l’accesso.
PT-TAPE02-WB Black laminated tape for PT-P700 printer
PT-TAPE02-WB

PT-TAPE02-WB Black laminated tape for PT-P700 printer

Disponibilità e prezzo sono visibili dopo l’accesso.
PT-TAPE02-WG Gray laminated tape for PT-P700 printer
PT-TAPE02-WG

PT-TAPE02-WG Gray laminated tape for PT-P700 printer

Disponibilità e prezzo sono visibili dopo l’accesso.